|
Designed for vacuum various bare
floor surfaces. The tool is made of die cast aluminum, has a
chromed steel tube where it fits into the wand as well as a soft
vinyl bumper for furniture protection.
Attached to the nozzle is a
replaceable oval brush. The oval brush is available in nylon,
horsehair, and upon request, tampico bristles. Nylon bristles
are generally the most widely used primarily for wear
characteristics. The horsehair bristles are softer than the
nylon and are generally chosen when vacuuming highly finished
wood and bare floors. The tampico (organic plant fibers)
bristles are stiffer than the nylon or horsehair and provide
better scrubbing characteristics.
14" Floor Brushes
The inside
dimensions at the bottom of the tool are 7/8" from front to rear
and 13-1/2" in length.
Nylon Bristle 14" Brush Models
Nylon Slotted Bristle 14"
Brush Models
The front of the oval brush on this
tool has a notched step cut into the bristles to allow dirt to
pass into the tool without lifting the front of the tool off of
the floor.
|
635SL
|
6355SL
|
6357SL
|
50635SL |
Squeegee and floor brush combination
with adjustable wheels Designed for
use in either wet or dry vacuuming applications. Supplied with a
set (2) of replaceable brush strips as well as a set (2) of
replaceable rubber blades. The brush strips and rubber blades
are easily interchangeable without the need for hand tools.
Wheels at both ends as well as
a knob at the rear of the tool, which is used to adjust the
distance between the floor surface and bottom of the tool.
18"
The dimensions of the opening at the
bottom of the tool are 7/8" from front to rear
and 16" in length.
20"
The dimensions of the opening at the
bottom of the tool are 3/4" from front to rear
and 18" in length.
700
 Download
Our Full Catalogue of Vacuum Hose & Tools |
CERTIFIED
DUSTLESS
